dirna Bergstrom bycool COMPACT 3.0 Instructions De Montage page 23

COMPACT 3.0
Place console and centre equipment in the
13
most convenient place of cabin roof. Once
centred, remove console for later installation.
IVECO Stralis since 2008: Make cuts in
14
the console at the indicated measurements,
and align the unit by fitting the console in the
original upholstery frame.
120 130
Fasten supports tightening nuts until outside
15
EPDM joint of equipment is compressed,
between 3 and 6 mm.
Important: To avoid water from filtering inside
cabin, check EPDM joint tightening with unit
base, as indicated on diagram.
3-6mm.
Cabin roof
Fasten selflocked nut until
15 EPDM gasket is compressed
between 3 and 6 mm.
130 120
EPDM gasket
10 mm*
(*) (approx. after tightening)
13
130
120
Base
Bracket
23
Check compression
thickness using a
tape measure in the
four corners.
EPDM gasket
EN
®
10
130
15