Panel Dimensions; Electrical Wiring; Control Functions - S&P BASIC Instructions De Montage Et D'utilisation

2.2. PANEL DIMENSIONS

2.3. ELECTRICAL WIRING

Connect using screened cable 2 x 0.3 mm
Maximum cable length: 50 metres.
Connect power supply to terminals + and – ensuring the polarity is correct. Connect
signal to the terminal marked S.

3. CONTROL FUNCTIONS

Control BASIC manages the following equipment functions:
• Display of alarms referring to dirty filter, fan stoppage, communication failure with control,
temperature probe or CO2 probe.
• By-Pass management.
• Manual speed control with push buttons.
• Automatic speed change using the external CO2 or humidity probes.
• Anti-frost management in the exchanger.
85 cm
85 cm
connected to the terminals marked: G-S-24V.
2
Specifications:
Power supply: 9/30 VdC 20 mA
Working temperature limits: 0/50ºC
Storage temperature limits: -20/70ºC
8