Partsidentification(Fig.1)
A Main unit
1 Power switch [0/1]
2 Battery cover
Attachments
B Triple‑edged brush (x1)
3 Bristles
C Cap
Attachingandremovingthecap
Attach and remove the cap as illustrated in (Fig. 2).
6
Attachingthebrushhead(Fig.3)
Align the mark on the brush head with the mark on
the main unit, and rotate it in the direction of the
arrow until it clicks.
Caution
• Inserting the brush head without aligning the
mark on the brush head with the mark on the
main unit may damage the brush head or the
main unit.
• Tightening it too much may cause deformation
and damage to the main unit and the brush head.