Connecting An External Playback Device - Medion LIFE X64060 Notice D'utilisation

The party speaker attempts to automatically connect itself to the last au-
dio output device connected via Bluetooth. If this is not possible, the
party speaker sends its device identification via Bluetooth and bt flashes
on the display.
 Switch on the Bluetooth function on your audio output device and ena-
ble search mode. On your audio output device select your party speaker MD
44060_1 for Bluetooth channel 1 or MD 44060_2 for Bluetooth channel 2 from
the list of available devices and pair the devices.
You can find more information about the Bluetooth function of your au-
dio output device in its user manual.
 If you are prompted to enter a password, enter 0000.
After successful Bluetooth pairing, a beep sounds and the party speaker's display
now permanently shows bt.
You can control how tracks are played and the volume on your audio
output device and on the party speaker. The functions available when
using an audio output device on the party speaker depend on your ex-
ternal device and the software used.

9. Connecting an external playback device

You can use the AUX IN connection to connect an external playback device (for ex-
ample a CD player or MP3 player).
 Switch the party speaker off.
 Switch off your external device.
 Plug the end of a 3.5 mm jack cable (not supplied with the device) into the AUX
IN socket on the back of the party speaker.
 Connect the other end of the cable to your external device.
 Switch on your external device.
 Switch the party speaker on.
 Press and hold down the /AUX button until the LED in the display lights up .
The audio signal from your external device will now be played back.
The track playback is controlled via the external device. The volume can
be controlled both on your external device and the party speaker.
DE
FR
NL
ES
IT
EN
149