Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
Clean the transparent lid, blade unit and bowl of the chopper.
•
Fix the blade unit in the chopper bowl (Step 1).
•
Fill the food to the bowl (not more than the maximum indicated level).
•
Place the transparent lid onto the chopper bowl (Step 2). Fit the main body
onto the transparent lid of the chopper (Step 3).
•
Check if the power cord is not damaged and the main body is in place.
•
Make sure your electricity supply is the same as the one shown on the
appliance.
•
Plug in, press the top cover downwards with one hand, slightly hold the
handle of chopper bowl with the other hand while operating, the appliance
starts running.
•
After you have completed chopping, Release the top cover, then unplug from
outlet.
•
Warning: The continuous operating time must be less than 30 seconds.
•
If your chopper gets blocked, first stop and unplug before clearing.
•
After use, unplug and dismantle the main body and the transparent lid in
sequence (Step4-5), take the blade unit out of the bowl by holding the plastic
shaft (Step 6), then pour out the food.
12
Publicité
Table des Matières
