Storage Instructions; Handle Installation; Shelf Instructions - Silhouette Professional DAR055D2BSSPRO Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATING INSTRUCTIONS

STORAGE INSTRUCTIONS

This appliance can hold a maximum of 123
beverage cans in 355 ml size.
1. The two top shelves can each hold 35 cans.
2. The half shelf can hold 28 cans.
3. The bottom can hold 13 cans.
4. Each door shelf can hold 6 cans.
5. The tall bottle storage shelf can hold 2 beverage
bottles in 2 liter size.
Note: It may be necessary to remove the braces
from the 2 liter bottle storage shelf.
1
2
3

SHELF INSTRUCTIONS

To remove a shelf from its locked position, remove
the shelf stoppers located on either side of the shelf.
To replace a shelf, ensure the shelf is resting
securely on the support brackets and push inward
until it locks into place.
Note: Do not cover shelves with aluminum foil or
any other material that will prevent air circulation
within the appliance as this can adversely affect the
internal temperature.

HANDLE INSTALLATION

To avoid damage during transportation, the handle
is shipped in packing foam on the front of the
appliance and must be installed by the end user.
4
The handle can be installed on either the left or right
side of the door depending on whether the door is
needed to open from the left or right side.
5
Note: See door reversal instructions if the default
door installation opening from the left side is
inconvenient.
To install the door handle:
1. Remove the screw hole covers found on the side
of the door. Save these hole covers for future
use.
2. Use a Phillips screwdriver and the provided
screws to install the handle on the side of the
door.
6

Publicité

Table des Matières
loading

Table des Matières