Setting The Temperature; Manual Override; Holiday Mode - Perel CTH406 Mode D'emploi

7.4 Setting a Program
1. Press P to enter the programming mode.
2. Set the day with
3. Select the hour with
mode for every hour of the selected day.
4. Press to select the next day. Repeat steps 1 to 3 to set the
program.
5. Press to confirm and to return to the normal display.
7.5

Setting the Temperature

1. Press to enter the temperature setting mode.
2. Select the comfort (
3. Set the temperature with
4. Press to confirm and to return to the normal display.
7.6 Setting the Temperature Sensitivity
According to your needs, adjust the temperature sensitivity range.
1. Press S to enter the sensitivity setting mode.
2. Set the sensitivity with
3. Press to confirm and to return to the normal display.
Example: The temperature is set at 26 °C, and the sensitivity is
S0.6. The connected heating appliance will switch on as soon as the
ambient temperature drops below 25.4 °C. Otherwise, it will be on
stand-by.
7.7

Manual Override

You can always override the set program by pressing the desired
mode or by setting the desired temperature. Confirm with
manual override symbol will be displayed.
In override mode, only
Cancel the override setting by pressing
7.8

Holiday Mode

The holiday mode allows temperature control during your absence.
1. In normal display mode, keep
2. Set the temperature with
V. 02 – 23/02/2018
CTH406
or . Confirm with P.
or . Set the comfort (
) or eco ( ) mode.
or
or , from S0.2 to S1.6.
, , and
pressed for two seconds.
or
8
.
will function.
.
. Confirm with
) or eco ( )
. The
.
©Velleman nv