Perel CTH406 Mode D'emploi page 7

7. Operation
7.1 Setting Time and Day
The thermostat automatically enters the time setting mode after the
batteries have been inserted. To set the time and day:
1. Set the hour with
2. Similarly, set the minutes and day.
3. Press to confirm and to return to the normal display.
7.2 Resetting
Press the RESET button located above the battery compartment to
reset all settings.
7.3 Switching the Thermostat On/Off
Press to switch the thermostat on or off.
In the off position, only the room temperature is displayed.
In the on position, the display can look like these:
a eco mode
b programmed temp
V. 02 – 23/02/2018
CTH406
or . Confirm with
c
d
7
.
override mode
comfort mode
©Velleman nv