Installation; Installation Distances - FAURE FSG25224 Notice D'utilisation

Problem
There is sparking in the cavi-
ty.
The turntable set makes
scratching or grinding noise.
The appliance stop to oper-
ate without a clear reason.
If you cannot find a solution to the problem yourself,
contact your dealer or the customer service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Installation

Caution! Do not block the air vents. If you do that,
the appliance can overheat.
Caution! Do not connect the appliance to
adapters or extension leads. This can cause
overloading and risk of fire.
• The appliance is for built-in use only.
• The fitted cabinet must not have a back wall behind
the appliance.
• Put the appliance far away from steam, hot air and
water splashes.
• If you transport the appliance in cold weather, do not
activate it immediately after the installation. Let is
stand in the room temperature and absorb the heat.
Electrical installation
Warning! Only a qualified person must do the
electrical installation.
The manufacturer is not responsible if you do not
follow the safety precautions from the chapter
"Safety Information".
This appliance is supplied with a main cable and main
plug.
Caution! Minimum installation height is 85 cm.
14
Possible cause
There are metal skewers or aluminium
foil that touches the interior walls.
There is an object or dirt below the
glass cooking tray.
There is a malfunction.
Make sure that the skewers and foil
does not touch the interior walls.
Clean the area below the glass cooking
tray.
If this situation repeats call the custom-
er service center.
The necessary data for the customer service center is
on the rating plate on the appliance.
.........................................
.........................................
.........................................
1. Check if the dimensions of the furniture meet the in-
stallation distances.
C
D
A
B

Installation distances

Dimension
A
B
Remedy
mm
380 + 2
560 + 8