Rothenberger Industrial 072990E Mode D'emploi page 7

LEGEND
= Wear goggles
APPLICATION
ASSEMBLY
You will need to assemble the crank handle (1) and the cleaning coil (3).
- Engage the crank handle (1) by pressing
together the slotted ends on the two
recesses and inserting them into the
bracket of the plastic housing (5).
- Attach the crank handle by pressing the
latch.
- Insert the cleaning coil (3) into the plastic
housing (5) as shown. Undo the locking
wheel (4) prior to this.
- Use your thumb to ensure the cleaning
coil is pressed against the inside the
plastic housing so that afterwards you
can re-insert it back into the housing
completely.
072990E_Anleitung.indb 7
= Wear protection
gloves
3
7
= Read the operating
instructions
1
4
31.03.15 13:17