Basic Settings - Velda FISH FEEDER PRO Mode D'emploi

the feeding mechanism stops moisture getting into the feed. The device also
includes four removable feed screws for dispensing various types of feed: one screw
with teeth for flake and natural feeds and three specially designed worm screws for
various grades of pellet from 3 to 12 mm. The amount of feed per dose varies
depending on the worm screw used. You can test the dose dispensed with each screw
and select the number of doses per feed. The Fish Feeder Pro has a digital operating
display. The display is splash-proof with an LCD screen. The settings for the feeding
times and doses are preserved even after a mains interruption.
INSTRUCTIONS
The feeding device can be placed by the pond in several ways (see illustrations).
1. In the ground using the enclosed ground/wall pin
The ground/wall pin should be fastened near the feeding place, next to the pond,
about 25 to 30 cm in the ground. Ensure a strong and straight anchoring. Next, the
feed container is attached by sliding it over the mounting plate at the end of the pin.
There is a special space at the back of the feed container. The feed container should
stay at least 20 cm above the water level.
2. On the wall using the enclosed ground/wall pin
The ground/wall pin should be fastened near the feeding place. Next, the feed
container is attached by sliding it over the mounting plate at the end of the pin. There
is a special space at the back of the feed container. The feed container should stay at
least 20 cm above the water level.
3. On the wall using the enclosed mounting plate
The mounting plate should be fastened near the feeding place.
The feed container should stay at least 20 cm above the water level.
4. Above the pond using a cord or cable
The feed container should be placed at least 20 cm above the water level by
fastening a cord or cable on the handle on the lid.
The control display should be installed in a dry place, protected against sun light.
The Fish Feeder is provided with 5 m of safety cable for outdoor use.
Optional 10 m of extra cable is available.

BASIC SETTINGS

You can navigate through the menu items using the arrow keys, and select them
using the middle key (set). You can change the setting when the black cursor blinks.
Use the arrow keys to select the right setting. Confirm it using the middle key (set).
First-time use
When you use the feeder for the first time, you must set the date, time and
language using the display. You can change the settings by navigating to 'date/time'
using the arrow keys and selecting them using the middle key (set). Then you can
change the days, months and years using the arrow keys, and confirm the settings
with the middle key (set). You can change the time in the same way. You can also
choose your preferred language. Once you have done this, you return to the menu.