About This Documentation; Delivery Contents - Aventics AV03 Instructions De Montage

Extension du système de distributeurs avec embases, plaques d'alimentation et plaques de combinaison
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
AVENTICS | AV03/AV05 | R412018508–BAL–001–AG | English
English
1

About this Documentation

This documentation is valid for extension kits
W
Valve base plate
W
Supply plate
W
Combination plates AV03/AV05
W
AV-EP base plates
W
AV-BP base plate
W
AV-BP supply plates
This documentation is intended for installers and contains important information on
the safe and appropriate assembly of the product.
This documentation describes
W
the extension of the AV03 and AV05 valve systems with base plates and supply
plates,
W
the extension of the AV03-BP and AV05-BP valve systems with base plates and
supply plates,
W
the installation of a combination plate as well as the installation of an AV-EP base
plate.
Required and supplementary documentation
O R412018507 Valve system assembly and connection, AV03/AV05, assembly
instructions
O R412019225 Pin assignment scheme for D-Sub connection, socket, AV03/AV05
O R412015575 Notes on Safety
O R414007537 Pressure regulator and base plate, AV-EP, operating instructions
O Also follow the instructions for the other components.
O Observe the system documentation from the system manufacturer.
Presentation of information
Warnings
In this document, there are safety instructions before the steps whenever there is a
danger of personal injury or damage to the equipment. The measures described to
avoid these hazards must be followed.
Structure of warnings
Hazard type and source
Consequences of non-observance
O Measures to avoid these hazards
Meaning of the signal words
Indicates a hazardous situation which, if not avoided, could result in minor or
moderate injuries.
Indicates that damage may be inflicted on the product or the environment.
Symbols
Operation may be impaired if this information is disregarded.
Abbreviations used
Abbreviation
Meaning
AV
Advanced Valve
AV-BP
Advanced Valve – bottom ported
2
Notes on safety
The product has been manufactured according to the accepted rules of current
technology. Even so, there is a risk of injury or damage if the following general safety
instructions and the specific warnings given in this instruction manual are not
observed.
O Keep these instructions in a location where they are accessible to all users at all
times.
O Always include the assembly instructions when you pass the product on to third
parties.
Safety information can be found in the document "Notes on Safety" (R412015575)
included with your valve system.
O Also always observe the information contained therein.
SIGNAL WORD
CAUTION
NOTICE
Intended use
The product is only intended for installation in the AV valve system.
The product may only be commissioned once it has been properly assembled into
the AV valve system.
W
Use is permitted only under the operating conditions and within the performance
limits listed in the technical data.
W
Only use compressed air as the medium.
W
The product is technical equipment and is intended for professional use only.
Personnel qualifications
All tasks associated with the product require basic mechanical, pneumatic and
electrical knowledge, as well as knowledge of the respective technical terms. In
order to ensure operational safety, these tasks may only be carried out by qualified
personnel or an instructed person under the direction of qualified personnel.
Qualified personnel are those who can recognize possible hazards and institute the
appropriate safety measures, due to their professional training, knowledge, and
experience, as well as their understanding of the relevant regulations pertaining to
the work to be done. Qualified personnel must observe the rules relevant to the
subject area.
General safety instructions
W
Observe the valid safety instructions and regulations to protect the environment
and avoid accidents.
W
Observe the safety instructions and regulations of the country in which the
product is used or operated.
W
To avoid injuries due to unsuitable spare parts, only use accessories and spare
parts approved by AVENTICS.
W
Only use AVENTICS products that are in perfect working order.
W
Follow all the instructions on the product.
W
Comply with the technical data and ambient conditions listed in the product
documentation.
W
You may only commission the product if you have determined that the end
product (such as a machine or system) in which the AVENTICS products are
installed meets the country-specific provisions, safety regulations, and
standards for the specific application.
W
Installation may only be performed in a voltage-free and pressure-free state and
only by a qualified technician. Always carry out the installation in a pressure-free
state to avoid dangerous movements.
W
Only commission the valve system with extension after it has been fully
assembled, including all tubing connections and correct wiring, and after re-
checking all connections for proper fit.
Safety instructions related to the product and technology
W
Note the information on the power requirements and power pack for your valve
system (assembly instructions R412018507).
3

Delivery Contents

Base plate extension kit
The delivery contents include:
W
AV series: Base plate (2x, 3x, and 4x) in accordance with the order, with sealing
kit, tie rod extension, and extension circuit board
W
AV-BP series: Base plate (2x and 4x) in accordance with the order, with sealing
kit, tie rod extension, and extension circuit board
W
Assembly instructions
Supply plate extension kit
The delivery contents include:
W
Supply plate in accordance with the order, with sealing kit, tie rod extension, long
hex socket-head screw (not for AV-BP), and extension circuit board
W
Assembly instructions
Combination plate extension kit AV03/AV05
The delivery contents include:
W
Combination plate in accordance with the order, with sealing kit, tie rod
extension, and extension circuit board
W
Assembly instructions
AV-EP base plate extension kit
The delivery contents include:
W
AV-EP base plate according to order with sealing kit, tie rod extension, circuit
board, and retaining clip (to fasten the pneumatic push-in fitting in the base plate)
W
Assembly instructions
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Av05

Table des Matières