Calibration Mode - Oregon Scientific Arena SWIMWATCH Mode D'emploi

CALIBRATION MODE

The watch must be calibrated when it is to be used by a different
user or used in a different setting (different swimming style
and pool length).
8. After completing 1 lap,
press
to stop. Do not wait for a
while before pressing.
1. Press and hold
Mode and wait for the screen to appear.
2. Press MEM to select the swimming style
(Freestyle, Backstroke, Breaststroke,
Butterfly).
3. Press SET to confirm.
4. Press MEM to select pool length (25 m
or 50 m).
5. Press SET to confirm.
6. The watch will prompt you to swim 1 lap (a lap
means swimming to the opposite end of the pool
and back again to the starting point once).
7. Press
wait for a while before swimming.
If calibration fail
immediately
If calibration is
successful
9. Press SET to go to Swim
Mode and start swimming,
or press
Main Mode.
9 9
to enter Calibration
and start swimming immediately. Do not
to return to
10. Press SET
to retry, or
press
to return to
Main Mode.