Ayce PLD2233 Traduction De La Notice Originale page 65

ON/OFF switch (Fig.6)
Fig. 6
!
This tool must be placed on its stand when not in use.
WARNING
Setting the air flow and temperature
Please observe the following sections "Setting the temperature" and "Setting the air
flow rate".
Setting
1
2
Memory function
The temperature and air flow rate selected last are retained after switching off the
device. The next time it is switched on the hot-air stripper gun will revert to the last
selected setting.
• Switch on: Press the power switch
• Switch off: Press the power switch
Air flow (I/min)
250 - 500
250 - 500
to position 1 or 2.
to position 0.
Temperature (°C)
Max. 50 °C
50° C to 650 °C
64 | 65 GB