Ayce PLD2233 Traduction De La Notice Originale page 63

!
Be careful of the hot nozzle! Increased danger of burning exists when
working without the heat protection collar.
WARNING
To remove or mount the heat protection collar, switch the appliance off and allow it
to cool down. To speed up the cooling, the appliance can also be operated for a short
period with the lowest adjustable temperature.
Pull the collar outwards to remove it.
Setting the temperature (Fig. 3)
Fig. 3
Increase the
temperature
!
Do not drop the device - the ceramic heating element that is located
inside the device is particularly sensitive to shock and impact.
WARNING
• The temperature can be increased and
decreased in intervals of 10 °C via the
control panel. To increase the
temperature press the left-hand
button (+); to decrease the temperature
press the right-hand button (-).
• Either tap the buttons briefly or press
and hold the buttons until the desired
Decrease the
temperature setting is reached.
temperature
• When doing this please note the
maximum temperature, which
depends on the on/off switch. The
maximum temperature is only possible
in switching to stage 2. If switching
to stage 1 is selected, the maximum
temperature is 50 °C and the
temperature cannot be adjusted. The
setting you have selected can be read
on the LCD display.
62 | 63 GB