Backlight Configuration; Error Messages - Gram Precision AH-150 Manuel D'utilisation

Use the
Press the
Press the
(Default value: "YES")
A.C Y. automatic auto-sample
A.C N. auto-sample disabled.

bACkLIgHT CONfIgURATION

Press the
the key.
Use the
options: 1, 2 and 3). Press the
Press the
(Default value: bl.1)
bl.1. Automatic backlight
bl.2. Backlight always on
bl.3. Backlight off

ERROR MESSAgES

The error messages are: "E1 . E2 . E5 . 0L".
These messages can appear if the platter is not installed properly or when
the environment is not adequate. Please, contact with your distributor.
20
and keys to select the desired mode (Yes - "Y" or Not - "N").
key to confirm.
key to return to previous menu or to exit.
key until the screen shows the message "b1.1", then press
and keys to select the backlight mode, there are three
key to return to previous menu or to exit.
key to confirm.