Weight Unit Selection; Reset To Zero; Tare; Overload Message - Gram Precision AH-150 Manuel D'utilisation

WEIgHT UNIT SELECTION

Press the key to select the weight units, the display will view the options.
There are 8 weight units available.

RESET TO ZERO

If the zero value varies during the weighing, press the key, the display
will show zero again.

TARE

This function allows calculating the net weight of a product.
With display showing "zero", place a container on the pan, then press the
key, the balance will subtract the container´s weight, put the product
into the container and then read the product´s weight on the display (net
weight).
To return to normal weighing model, remove the container and press the
key.

OVERLOAD MESSAgE

If an object is placed on the pan and its weight exceeds the maximal capacity
of the balance, the display will show the message "-----OL-----", at the same
time, the balance will beep. Remove the object; otherwise it may damage the
mechanism of the balance.
13