Columbus SX 44 Mode D'emploi page 10

2. Fill the solution tank with cold or warm water, through the filling hole, adding a 5% of non-
foaming detergent (1/2 liter in 10 liters). Higher concentrations may be used in case of
particularly dirty surfaces.
Attention: wool carpet must be washed with cold water only!
3. Reconnect the upper tank to the lower tank with the lateral hooks.
4. Connect the machine to the wand or to the accessory with the solution and with the vacuum
hoses. The quick-disconnect couplings at the end of the solution hose (the thin one) must be
inserted in the correspondent couplings: one is on the body of the machine and the other one
is on the water valve that you find on the wand or on the accessory handle.
8