Model Description; Model Designation; Specifications; Plug Configuration - Hatco SAL Série Manuel D'installation Et D'utilisation

Salamander
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IMPORTANT SAFETy INFORMATION
NOTICE
Units are voltage-specific. Refer to specification label for
electrical requirements before beginning installation.
Do not install unit above grills, fryers, or other appliances
that will expose unit to high temperature, excessive
moisture, or grease-laden air. Improper installation will
void warranty.
Use non-abrasive cleaners and cloths only. Abrasive
cleaners and cloths could scratch finish of unit, marring its
appearance and making it susceptible to soil accumulation.

MODEL DESCRIPTION

All Models
Hatco's Salamander is specially-designed for versatility in the
kitchen with the capabilities to cook, grill, reheat, and keep
foods hot. The salamander is constructed of stainless steel for
easy cleaning and durability. The high-powered heating
elements are ready for use within 8 seconds. The plate
detection feature activates the heating elements automatically
when a food plate comes into contact with the plate detection
bar. Removal of the food plate turns off the heating elements
automatically. The three heating elements can be controlled
independently using the individual ElEmENT SElECTOR keys
located on the control panel. The heating elements are
strategically positioned inside the moveable upper housing to
reduce the transfer of heat to the surrounding area. The HOlD
function has eight temperature levels and is ideal for keeping
foods hot or reheating foods. The removable cooking grate and
drip tray allow for easy cleanup. The unique features and
flexibility of the Hatco Salamander make it easy to operate,
energy efficient, and highly functional in any kitchen.

MODEL DESIGNATION

SPECIFICATIONS

Plug Configuration

Some units are supplied from the factory with an electrical cord
and plug installed.
WARNING
ELECTRIC ShOCK hAzARD:
• Plug unit into a properly grounded electrical receptacle
of the correct voltage, size, and plug configuration. If
plug and receptacle do not match, contact a qualified
electrician to determine and install the proper voltage
and size electrical receptacle.
• Units supplied without an electrical cord and plug
require a hardwired connection to on-site electrical
system. Connection must be properly grounded and of
correct voltage, size, and configuration for electrical
specifications of unit. Contact a qualified electrician to
determine and install proper electrical connection.
S A L - 1
Salamander
Do not operate unit without drip tray and cooking grate
installed. Damage to unit could occur.
This unit is intended for commercial use only—NOT for
household use.
Clean unit daily to avoid malfunctions and maintain
sanitary operation.
Do not lay unit on the side with the control panel or damage
to unit could occur.
Plate
Detection
Bar
Capacity = Quantity of Half Size Pans
Plug Configuration
NOTE: Receptacle not supplied by Hatco.
NOTE: Specification label located on the side of the unit. See
label for serial number and verification of unit electrical
information.
4
English
NOTICE
Upper
Housing
Cooking
Grate
Control
Panel
model Sal-1
NEMA 6-30P
Form No. Salm-0915
Drip
Tray

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Sal-1

Table des Matières