Write; (Customer Database) - JMA TRS 5000 Notice D'utilisation

When you are going to copy a car key, if it is a fixed
code transponder you can proceed as normal, but if it is
an encrypted code transponder, before making the copy
you need to consult the TPX Cloner Manual. The general
steps when making a copy using the computer program
are as follows:
A. Connect the PC and the TRS-5000 via the USB cable.
B. Run the TRS-5000.exe file. Make sure that there is no
more than one interface program open at the same
time, as otherwise it could cause communication pro-
blems with the TRS-5000 machine.
C. Switch on the TRS-5000 machine using the switch loca-
ted on the back of the machine.
D. The following message will appear on the machine's
display:
JMA TRS-5000
Conectada a PC
E. Select the COPY option, either by clicking on the pull-
down menu on the left-hand side, or by selecting the
option KEY and COPY in the main menu.
F. You will then be asked to insert the key you want to
copy in the TRS-5000 and after the program has iden-
tified the key, a file will be opened in which you can
enter all your customer's data so that the operation is
recorded and you can make use of it in the future. You
can even make a key for a customer just with the data
you have saved in the file. You only need to download
the customer data you have in the database onto the
right transponder.
G. For the write key option to be operative you must
fill in the "Surname" and vehicle "make and model"
fields.

5.1.1.2 Write

Always for a fi xed code transponder
Figure 3: Write function screenr
To run this function, click on KEY in the menu, and then
on WRITE. Once inside the code window, you can make
the copy of the key. The program will wait for the key
to be copied to be inserted, then you press READ for the
program to display the key's code.
After this, you can enter the code required, or leave it as
it is.
Once the code to be copied has been selected, click on
the WRITE option, with the key in place with the relevant
transponder that you want to program in the TRS-5000
antenna's housing, the code on screen will be copied into
the transponder's memory.
During the operation, a cursor will continuously indicate
how much of the code has been copied.
5.1.2 File
5.1.2.1 Customers (Customer Database)
Figure 4: Customer fi le function screen
With this function, you can use the data for a customer
that was saved in the program database at an earlier
date.
This function is very useful if a customer comes along
without an original key and you have copied a key for
this customer before, provided that the data was stored.
You just have to get the data on screen and copy it onto a
blank key, which will be the copy base.
If you select this function there are two ways of accessing
it, either by clicking on the "Customer" option in the pull-
down menu on the left-hand side, or by clicking on "FILE"
in the top menu, and then on "CUSTOMER".
You can search for a customer's data in two different
ways:
A. Using the "Search" option (to the right of the files),
selecting the field you are going to enter, and entering
some of the data (customer's name, car number plate,
identity card no., etc.) referring to the file you are
looking for and then clicking on Return (confirmation
button), which will get all the data relating to the cus-
tomer you are searching for on the screen.
B. If you cannot remember any of the data from the
customer's file, you can check by means of the options
"First", "Previous", "Next", "Last", displaying all the
files available in you database one by one.
17