HBM S2M Notice De Montage page 13

S2M
Scope of supply and equipment variants
- 3106 PEMV connector (Greenline): for connection
to appropriate amplifier systems, e.g. MGCplus
with AP03. (option N)
- ConP1016 connector, 14-pin, for connection to the
Somat XR measurement system.
- Free ends: transducer delivered without plugs
3. TEDS
You can order the force transducer with transducer
identification ("TEDS"). TEDS (Transducer Electronic
Data Sheet) allows you to store the transducer data
(characteristic values) in a chip that can be read out
by a connected measuring device (with an appropriate
amplifier). HBM records the TEDS data before deliv­
ery so that no parameterization of the amplifier is ne­
cessary. TEDS can only be fitted in the plug of the
S2M, therefore it is not possible to equip the "free
cable ends" version with TEDS
A3592-1.3 HBM: public
11