Setting The Thermostat; Technical Data - purline NDB-09S Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

SETTING THE THERMOSTAT:

1. The oil heater has 2 heating elements (D).
2. You may adjust the room temperature by rotating the
thermostat knob (C) from « - » to « + » position.
a. Plug the heater in (Warning: the cable must be fully
unwind and not in contact with the heater).
b. Turn the thermostat to « + » .
c. The Power light will illuminate.
d. When the room has reached the desired temperature,
slowly move the thermostat knob counter-clockwise
when the Power light goes off it indicates that the
thermostat too is off. Leave it in this position.
e. When the room temperature falls below the required
level the power light will illuminate again and the
heater will start running.
f. The thermostat switches itself on and off keeping the
room temperature at the desired level.
When this device is overheated it is automatically turned off by a
special security system. Unplug the device and let it cool down
before activating it again.
NOTE : The oil heater will operate differently according to the
size of the room in which it is used. (If it is used in a very
large room, the gap between the set temperature and the
actual temperature of the room could be quite substantial).
WARNING:
- ALWAYS SWITCH OFF AND UNPLUG THE HEATER (button on 0
position + thermostat on minimum position) BEFORE CLEANING OR
SERVICING.
- NEVER IMMERSE THE UNIT IN WATER
17
CLEANING :
1. Switch off and unplug the heater , wait 5-10 minutes for the
unit to cool down.
2. Using a soft cloth, clean the body of the heater carefully.
Never use alcohol , solvents, acids like vinegar or abrasives.
STORAGE :
Pack the heater and those instructions in the original packing. Store
in a dry place.

TECHNICAL DATA :

NDB-09S
Dimensions
460x150x570mm
Net Weight
10.8 kg
Voltage
220-240V
Input voltage
2000 W
Characteristics prone to change without notice
warranty :
The warranty is valid for 2 years for a « manufacturing fault ».
To benefit from the warranty, please return the device to your dealer
with POSTAGE PAID along with the document of purchase proof
specifying the date of
purchase.
Removal of used domestic appliances
European directive 2002/96/EC on the Electric and Electronic
Equipment Waste requires that domestic appliances not be
thrown out together with the rest of municipal waste. Used
devices must be collected separately in order to optimize
18

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ndb-07nNdb-011nNdb-09n

Table des Matières