Storage; Troubleshooting; Technical Data - Proficook PC-EWB 1007 Mode D'emploi

• Turn the residual water drain valve anti-clockwise to
drain off the rest of the water.
• Close the residual water drain valve after the resid-
ual water has been drained.
Problem Possible Cause
No function. No power supply.
The appliance is faulty.
Compressor noisy. Mains power supply too low.
Water refill.
Indicator lamp
flashes.
The ice cubes are Surrounding temperature is too high.
too small.
The water temperature is too high.
Smaller ice cubes are normal during the first production cycles.
Ice cubes are too Water temperature or ambient temper-
large and stick ature too low.
together.
The water tray is blocked by oversized
The symbol
ice cubes.
flashes.

Technical Data

Model:..................................................... PC-EWB 1007
Voltage supply: ................................ 220 - 240 V~, 50 Hz
Power input: ......................................................... 0.68 A
Ice cube production: ........................... 10 - 15 kg / 24 Std.
Water tank volume: ............................ approx. 1.8 Liters
Refrigerant: .................................................R600a / 23 g
Propellant: .............................................................C
Protection class: ............................................................
Climate class: ...............................................................T
Net weight: .......................................... approx. 10.85 kg
PC-EWB1007_IM
• We recommend that you keep the appliance in the
original packaging if you do not intend using it for
long periods.
• Always keep the appliance out of the reach of chil-
dren in a dry, well-ventilated place.

Troubleshooting

Solution
Use the on / off switch (4) to turn the appliance
on.
Test the socket with another appliance.
Plug in the mains plug correctly.
Check the main circuit breaker.
Contact our service center or a specialist.
Turn the appliance off and check the mains
power supply.
Refill water
Place the appliance in a cooler location.
Make sure there is adequate air circulation
around the appliance.
Stop the ice production. Drain some water and
refill cold water (max. 20 °C).
Stop ice cube production.
Drain off some water and refill with lukewarm
water (max. 35 °C).
Use the on / off switch (4) to turn off the appli-
ance. Wait until the ice cubes are loosened.
Switch the appliance on again. Use ON to
restart.
The right to make technical and design modifications
in the course of continuous product development
remains reserved.
This device has been tested according to all relevant
current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
H
5 10

Storage

"Making Ice Cubes".
23.05.16
45