Intended Use; Supplied Parts; Unpacking The Appliance; Overview Of The Components - Proficook PC-EWB 1007 Mode D'emploi

It is intended for use in the household and in similar applications, such
as:
• In personal kitchen areas in shops, offices and other work areas;
• By guests in hotels, motels and other accommodation;
• In bed and breakfast accommodation;
• In agriculture.
It is not intended for the following use :
• In catering and similar wholesale use.

Supplied Parts

1 Ice cube maker
1 Fill cup (Measuring beaker)
1 Ice shovel
1 Replacement seal for drain valve

Unpacking the Appliance

1. Remove the device from its packaging.
2. Remove all packaging materials like foils, filling
materials, cable holders, and carton packaging.
3. Check the scope of deliveries for completeness.
4. If there are missing parts or obvious damage,
do not use the device. Return it to your retailer
immediately.
NOTE:
There may still be dust or production remains on the
device. We recommend that you clean the device as
described under "Cleaning and Maintenance".

Overview of the Components

Figure A
1 Housing
2 Water tray (inside the appliance)
3 Ventilation openings
4 On/off switch
5 Residual water drain valve
6 Water tank (inside the appliance)
7 Ice cube container
8 Display and touch screen ("Touchscreen" interface)
42
PC-EWB1007_IM

Intended Use

Figure B
Shown on
Display
ON
OFF
TIME
SET
TIME
TIME
CAUTION:
Please observe a waiting period of 2 hours before
initial operation and after moving the appliance for
the refrigerant to settle; otherwise the compressor
can be damaged.
Meaning
Start making ice cubes
Interrupt / finish making ice cubes
Time / Show / confirm timer
Time / Change / activate / deactivate
timer
Programmed switch-on time
Programmed switch-off time
Ice cube tray full
Water refill
Rotating display: Ice cube being made
Flashing display: Fault

Operation

23.05.16