ION iTT03X Manuel D'utilisation Du Propriétaire page 2

1. Make sure all items listed on the front of this guide are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT
3. Study this setup diagram.
4. Place product in an appropriate position for operation.
5. Make sure all devices are turned off and all faders are at "zero"
6. Connect all stereo input sources as indicated in the diagram.
7. Connect the stereo outputs to the power amplifier(s), tape decks, and/or audio
sources.
8. Plug your mixer and other devices into AC power.
9. Switch everything on in the following order.
audio input sources (i.e. turntables or CD players)
·
your mixer
·
last, any amplifiers
·
10. When turning off, always reverse this operation by,
• turning off amplifiers
•
your mixer
• last, any input devices
11. Go to http://www.ion-audio.com
QUICK SETUP GUIDE (ENGLISH)
TO PHONO
TO LINE
for product registration.
TO PHONO
TO LINE