Indel Webasto Marine Isotherm Ice Maker White Instructions Pour L'installation Et L'utilisation page 6

WARNING! Install the product in a dry place that's sheltered against water
spray. The unit's electrical components must NOT be exposed to rainfall and/or
sprays of water.
WARNING! Install the product away from gas or LPG cylinders.
WARNING! The product must be installed in an area accessible for any
maintenance. The housing space of live parts and of the condensing unit/compressor
must only be opened voluntarily and not directly accessible.
WARNING! The compressor/condensation unit installation area must be
made with a material resistant to the needle-flame test required by standard EN
603335-1 or else be more than 5 cm from electrical and/or electronic components.
WARNING! The product must be protected against indirect contact in
accordance with the "Heavy Current Regulations".
WARNING! In case of power connection from AC mains, to avoid the risk
of serious personal injury, ensure that it is equipped with cut-off devices (switches)
which permit total disconnection of the product current and protective devices
which automatically intervene in the event of malfunction.
WARNING! Never touch any damaged or non-insulated electrical cables
while the electrical power supply is enabled. This observation is particularly true
when the product is connected to 115Volt or 230Volt.
WARNING! The product must be installed horizontally and the compressor
must always be installed with its rubber feet resting downward.
6
ENGLISH - Warnings