Usage Instructions; Usage Recommendations - Indel Webasto Marine Isotherm Ice Maker White Instructions Pour L'installation Et L'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 91

2. Usage instructions

The climate class is indicated on the data plate inside the product itself.
SN or extended temperate class (ambient temperature from 10°C to 32°C)
N or temperate class (ambient temperature from 16°C to 32°C)
ST or subtropical class (ambient temperature from 16°C to 38°C)
T or tropical class (ambient temperature from 16°C to 43°C)

2.1 Usage recommendations

Frequent opening of the product will result in greater power consumption.
Ensuring adequate ventilation for the compressor and the condensing unit will
significantly reduce power consumption.
Never obstruct the ice maker's ventilation system.
To keep the surface of the door in good conditions and intact, make sure that it
is always clean and dry.
The compressor can operate up to an angle of 30°, while greater angles can
cause permanent damage to the compressor.
WARNING! Do not use the ice cube container to cool or conserve food
or drinks as these operations could clog the drain, resulting in the container itself
becoming filled, resulting in water leakage.
WARNING! Any use of the product other than for ice making using cold
drinking water is to be considered improper.
14
User Manual

Publicité

Table des Matières
loading

Produits Connexes pour Indel Webasto Marine Isotherm Ice Maker White

Table des Matières