Electrical Connections - Indel Webasto Marine Isotherm Ice Maker White Instructions Pour L'installation Et L'utilisation

User Manual

4.4 Electrical Connections

• In order connect the unit to the vehicle's electrical system, proceed as follows:
WARNING! Before connecting the product to the power supply, make sure
that the mains voltage corresponds to that indicated on the data plate.
WARNING! Make sure that the product is connected to an effective
grounding system.
WARNING! Check that the electrical flow rate of the system is adequate for
the maximum power of the product indicated on the data plate.
WARNING! For a correct and safe installation of the product, it is essential to
prepare a special socket controlled by an omnipolar switch with an opening distance
of the contacts that is equal to or greater than 3mm, in compliance with current
national safety standards, equipped with fuses, with associated differential and
positioned in such a way as to be easily accessible.
Connect the plug to the power supply socket.
WARNING! It is advisable to unroll the entire length of the power cable,
making sure it does not get crushed in any way.
If the power cable is damaged, it must be replaced by professionally qualified
personnel using a cable in compliance with current national safety standards.
All wiring diagrams can be found at the end of the manual.
23