User Settings - Health O Meter PRO PLUS 1100KL Guide D'utilisation

OPERATION INSTRUCTIONS
02 USB Connection
07

USER SETTINGS

Before making changes to this scale setting, please refer to page 12 "Menu" to temporarily
activate the Menu key.
The scale will test the connection to the PC and will display a
message "Connection is OK" or "NO Connection".
If "NO Connection" is displayed, check your USB connections
on the scale and on your PC and retest the connection. Refer
to qualified service personnel if problem persists.
The scale has a diagnostic routine where it tests the User
Interface (UI) hardware functionality (LCD, keypad). In order to
do this the user has to press all the keys according to the
messages displayed on the screen.
If the requested command was not received or wrong button
was pressed, the following message will be displayed.
If after 10 seconds the requested command was not received,
the following message will be displayed. If "UI Error Failure" is
displayed, refer to qualified service personnel.
20