Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
This
connection
Speed/Sounder/Temperature
3.2.2.3. Sounder connection
Connection to the sounder sensor is via a 30 cm coaxial cable and an overmoulded
RCA connector.
3.2.3. Connections
•
Connect the sounder sensor to the RCA connector
•
Connect the speedometer sensor to the LT8 connector
•
Connect the - power to the black wire without connector and the red
wire to the + power via a switch and a 1A fuse.
•
For a system comprising several "Advansea" instruments, connect all the
orange bus wires from each instrument together.
•
Connect an NMEA source (GPS for example) to the yellow wire for the
+nmea and the black for the – nmea
See diagram below:
is
used
to
Installation and Operation Manual S400 series
connect
a
multifunction
sensor:
20
Publicité
Chapitres
Table des Matières
