ohmex AIR 9000 CON Manuel D'utilisation page 105

AIR 9000 CON
Seasonal cleaning
At the end of the hot season or if it is intended to not use the appliance for a prolonged
period of time, work as follows:
• Turn the appliance off and disconnect the plug from the socket.
• Place the appliance near a water unloading point or position a container in the rear
part of the appliance.
• Remove the cover (11)
• Remove the cap (10); water immediately leaks from the joint.
If desired, connect a small hose (not supplied) to the unloading joint to better
direct water.
☞
Do not perform this operation on wooden floors, on carpets
or wall-to-wall carpeting.
Make sure that leaking water doesn't enter in contact with
delicate objects, with cables or power sockets.
• Slightly tilt the appliance on one side to allow all water to flow out.
• Correctly reposition the cap (10) and the cover (11).
• Insert the plug in the socket.
• Start the appliance in "Ventilation" (FAN) mode.
Let the appliance work for 3÷6 hours so that the appliance inside dries.
This procedure prevents the formation of mould inside the appliance during stor-
age.
• Clean, dry and correctly reposition the filters.
• Remove the closure support from the window.
• Remove the flexible hose and the adapter from the appliance.
• Store everything in a dry place protecting the appliance with a plastic enclosure if
possible.
CLEANING
EN
101