Operation Methods - ohmex AIR 9000 CON Manuel D'utilisation

AIR 9000 CON
> > Appliance switching on
After the correct assembly and installation, it is possible to turn the appliance on.
• Connect the power cord plug to the power socket.
• Before electrically connecting the appliance make sure that the mains voltage
corresponds to the one indicated on the rating label.
• The appliance will emit an acoustic signal indicating that it is in stand-by mode. The
display shows the detected ambient temperature.
> > Operation Methods
Cooling mode
• After machine turns on, default value is cooling mode with 22°C and low fan speed.
• Press "MODE" ( "21" or "46" button) to select cooling mode, cooling mode (COOL)
indictor turns on.
• Press or
• Press "FAN" ( "25" or "45" button) to select high or low fan speed.
Fan mode
• Press "MODE" ( "21" or "46" button) to select fan mode, fan mode indicator turns on.
• Press "FAN" to select fan speed, press
• Temperature and SLEEP function cannot be setup.
Dehumidifying mode
• Press "MODE" ( "21" or "46" button) to select dehumidifying mode (DEHUM), dehu-
midifying mode indicator turns on.
• Under dehumidifying mode, timer and SLEEP function cannot be setup, and fan
speed is low.
Timer mode
• Under standby mode, press "TIMER" to set up the power-on time, press "TIMER"( "26"
or "41" button) to adjust the timer (from 1 to 24). Timer indicator turns on.
• Under power-on mode, press "TIMER" to set up power-off timer. Press "TIMER" to ad-
just the timer (from 1 to 24). Timer indicator turns on.
to adjust temperature ( from 16°C to 31°C).
USE
or to select high speed or low speed.
EN
97