Programs Running Automatically; Music Control - Stage Line electronic LED-600DX /RGB Mode D'emploi

Stroboscope dmx à leds et projecteur de couleurs
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
6.3 Colour radiator and stroboscope
GB
In this mode the unit constantly radiates light in an
adjustable colour. In addition, the stroboscope
function can be activated.
1) Press the buttons R, G and B (numerical keys 7,
8, 9) on the remote control to switch on and off
the red, green and blue LEDs independently of
each other.
The stroboscope function can be switched
on and off with the button STROBE. With the
function activated, the flash frequency can be
changed with the buttons UP and DOWN.
2) Via the menu item
...
) and 2 colour patterns (
can be selected at maximum brightness and the
function
( ), green ( ) and blue ( ) LEDs can be adjusted
from 000 to 255.
For the adjusted colour, the stroboscope
function can be activated and deactivated and
the stroboscope frequency can be adjusted,
either via the menu
= stroboscope off
= stroboscope slowly
= stroboscope fast
or with the remote control (button STROBE and
then button UP or DOWN).

6.4 Programs running automatically

Two programs can be selected:
AUTO 1 = colour transitions
AUTO 2 = different running light effects
1) Activate the desired program via the menu item
or with the remote control (button AUTO 1
or AUTO 2).
2) Adjust the running speed either via the menu
(
...
ton SPEED and then button UP or DOWN).
3) For the adjusted program, the stroboscope
function can be activated and deactivated and
the stroboscope frequency can be adjusted,
either via the submenu item or with the remote
control (button STROBE and then button UP or
DOWN).
12
, 7 fixed colours (
, by which the brightness of the red
) or with the remote control (but-

6.5 Music control

In case of music control, the LEDs light up by the
sound picked up via the microphone (9). Two pro-
grams can be selected:
SOUND 1 = short lighting-up with changing colours
SOUND 2 = different running light effects
1) Switch on the desired program via the menu
item
SOUND 1 or SOUND 2).
2) Adjust the control SENSITIVITY (3) for the
microphone sensitivity so that the LEDs are
controlled by the music in an optimum way. The
,
)
further the control is turned up, the more sensi-
tive the response of the music control.
Note: When changing the volume at the music system, also
the sensitivity of the microphone must be adapted accord-
ingly with the rotary control.
6.6 Synchronous control
of several LED-600DX / RGB
(master-slave mode)
Several LED-600DX / RGB can be interconnected.
Then the master unit can control all slave units in
sync.
1) Interconnect the units to a chain via the DMX
connections. For this purpose see chapter 6.7.1
"DMX connection", however, skip step 1.
2) The first unit of the chain [whose input DMX IN
(7) is not connected] serves as a master unit
and controls the slave units. Adjust the slave
units to the slave mode. Either press the button
SLAVE on the remote control or activate the
slave mode via the menu:
a) Press the button MENU repeatedly until the
indication on the display does not change
any more.
b) Press the button UP or DOWN repeatedly
until the display shows
c) Press the button ENTER. The display is
switched to
and colour patterns
or with the remote control (button
.
.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

38.6420

Table des Matières