Würth 1952 006 650 Traduction Des Instructions De Service D'origine page 19

For use with set of commercial pushers, directly on
vehicle or workbench
Fig. 12 The example shows how to use it with the open lower
support and the insertion ring.
In this example it is used in combination with a special
set of commercial pressers (e.g.: Würth 1952 006
570).
Removal and fitting of the joint through an arm of a
Mercedes Sprinter or VW Crafter.
Different types of intervention
The press frame is provided with two reduction adapters so that the
user can operate in different ways, i.e. by using standard systems
already available or even Würth systems, which can be ordered
on request.
The following 3 connection threads are available:
A
TR27 for mechanical operation
Black reduction from 1-1/2"x16G to TR27
B
1-1/2"x16G for mechadraulic screw operation
Silver reduction from 2-3/4"x16G to 1-1/2"x16G
C
2-3/4"x16G for hydraulic cylinder operation
Thread - press frame upper support
Mechanical Spindle TR27
Included in the supply
14
12
13
Hydraulic Mechanical-hydraulic 16 tons
Available on request Würth 1952 004 070
15
A
B
C
Hydraulic Cylinder 12 or 17 tons
Available on request, e.g.:
Würth 1952 004 090/1952 004 110/
1952 004 120/1952 004 130
16
19