Würth 1952 006 650 Traduction Des Instructions De Service D'origine page 18

Use of lower Supports – thrust screws and adapters
Fig. 5 Lower support with TR20 trapezoidal threaded bushing.
For application with TR20 trapezoidal thrust screw, long
or short.
Fig. 6 Lower support with short screw mounted on trapezoidal
threaded bushing.
The trapezoidal screw has a clamp to secure the
adapters of the pressure bushings.
Fig. 7 Lower support with short screw and Ø21 mm system
adapter.
Ready as adapter for the various types of commercial
pressure bushings (pressers).
Fig. 8 Lower support with short screw and Ø21 mm system
adapter plus Ø29 mm system adapter for Wurth
pressure bushing system.
For use in combination with the set of Universal Tools
for the assembly and removal of silent blocks - item
Würth 1952 003 880
Fig. 9 Lower cross member with adapter – system and sockets
support plate inserted.
Fig. 10 Lower support with support washer and pressure
bushing.
Fig. 11 The support washer is secured to the adapter mounted
on the thrust screw.
Then place the proper pressure bushing (depending on
the diameter of the silent block).
Between the support washer and the silent block.
The example shows the insertion and removal of the
silent block on the aluminium arm of an Audi.
18
5
7
9
11
6
8
10