Improper Use; Personnel Qualification - ACU-RITE IOB 610 Guide D'utilisation

2.3

Improper use

When the product is used it must be ensured that no
hazard to persons can result. If any such hazard exists,
appropriate measures must be taken by the operating
company.
In particular, the product must not be used in the following
applications:
Use and storage outside the specifications
Outdoor use
Use in potentially explosive atmospheres
Use of the product as part of a safety function
2.4

Personnel qualification

The personnel for mounting, installation, operation,
service, maintenance and removal must be appropriately
qualified for this work and must have obtained sufficient
information from the documentation supplied with the
product and with the connected peripherals.
The personnel required for the individual activities to be
performed on the product are indicated in the respective
sections of these instructions.
The personnel groups that are responsible for mounting,
installation, operation, maintenance and removal have
different qualifications and tasks, which are specified as
follows.
Operator
The operator uses and operates the product within the
framework specified for the intended use. He is informed
ACU-RITE | IOB 610 | Operating Instructions | 04/2018
by the operating company about the special tasks and the
potential hazards resulting from incorrect behavior.
Qualified personnel
The qualified personnel are trained by the operating
company to perform advanced operation and
parameterization. The qualified personnel have the
required technical training, knowledge and experience and
know the applicable regulations, and are thus capable of
performing the assigned work regarding the application
concerned and of proactively identifying and avoiding
potential risks.
Electrical specialist
The electrical specialist has the required technical training,
knowledge and experience and knows the applicable
standards and regulations, and is thus capable of
performing work on electrical systems and of proactively
identifying and avoiding potential risks. Electrical
specialists have been specially trained for the environment
they work in.
Electrical specialists must comply with the provisions of
the applicable legal regulations on accident prevention.
7