Table Des Matières; Packing - Makita EK7650H Instructions D'emploi D'origine

English
Thank you for purchasing a MAKITA
product!
Congratulations on choosing a MAKITA Power Cutter! We are
confident that you will be satisfied with this modern piece of
equipment.
We want you to be satisfied with your MAKITA product.
In order to guarantee the optimal function and performance of your
Power Cutter and to ensure your personal safety we would request
you to perform the following:
Read this instruction manual carefully before putting the Power
Cutter into operation for the first time, and strictly observe the
safety regulations! Failure to observe these precautions can
lead to severe injury or death!
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible manufacturer
declare that the following Makita machine(s):
Designation of Machine: Power Cutter
Model No./ Type: EK7650H, EK7651H
Specifications: see "Technical data" table.
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following standards or
standardised documents:
EN ISO 19432
The technical documentation is kept by our authorized
representative in Europe who is:
Makita International Europe Ltd.,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
The conformity assessment procedure required by Directive
2000/14/EC was in Accordance with annex V.
Measured Sound Power Level: 113 dB (A)
Guaranteed Sound Power Level: 114 dB (A)
14. 1. 2011
Tomoyasu Kato
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
(Original instructions)
Director
Table of Contents
Packing ............................................................................................2
Delivery inventory ..........................................................................3
Symbols...........................................................................................3
SAFETY PRECAUTIONS ................................................................ 4
General precautions ................................................................... 4
Protective equipment ................................................................. 4
Fuels / Refuelling ....................................................................... 5
Putting into operation ................................................................. 5
Cutoff discs ................................................................................ 6
Kickback and lock-in .................................................................. 7
Working behavior / Method of working ....................................... 7
Cutting metals ............................................................................ 8
Cutting masonry and concrete ................................................... 8
Transport and storage ................................................................ 9
Maintenance ............................................................................. 10
First aid .................................................................................... 10
Technical data ............................................................................... 11
Denomination of components ..................................................... 12
PUTTING INTO OPERATION ........................................................ 13
Mounting the cutting disc ......................................................... 13
Tightening the V-belt / Checking V-belt tension ....................... 14
Before operating ....................................................................... 14
Operating .......................................................................................16
Starting ..................................................................................... 16
Adjusting the carburetor ............................................................. 17
MAINTENANCE .............................................................................17
V-belt ....................................................................................... 18
Cleaning the protection hood ................................................... 18
Cleaning/changing the air filter ................................................. 19
Spark plug maintenance .......................................................... 20
Replacing the suction head ...................................................... 20
Cleaning the starter .................................................................. 21
Changing the cutting attachment position (central/side) .......... 22
SPECIAL ACCESSORIES ............................................................. 23
Diamond cutting discs .............................................................. 23
Guide trolley ............................................................................. 23
Water tank (the component of trolley) ...................................... 23
Mains/pressure water system .................................................. 23
Maintenance chart ........................................................................24
Fault location ................................................................................25
Troubleshooting ...........................................................................26
Storage ..........................................................................................27

Packing

Your MAKITA Power Cutter is packed in a cardboard box to prevent
shipping damage.
Cardboard is a basic raw material and is consequently reuseable or
suitable for recycling (waste paper recycling).
2
Page