Replenishing Staples - Kyocera DF-780 Manuel D'utilisation

5. Remove the jammed paper.

Replenishing staples

If an indication that staples have run out
appears on the operation panel of the copier
(or the message display of the printer),
perform the following procedure.
3. Remove the empty staple cartridge from
the staple cartridge holder.
* The staple cartridge can only be
removed when it contains no more
staples.
8
6. Close the top cover and reattach the
Document Finisher to the copier (or
printer).
1. Open the staple cover.
4. Insert the new staple cartridge into the
staple cartridge holder.
2. Remove the staple cartridge holder.
5. Re-install the staple cartridge holder.
The staple cartridge holder will click into
place when it has been inserted correctly.