Audio Setting; Subwoofer On And Off; Setting The Subwoofer System; Setting The Filter Type - Alpine CDA-9887 Mode D'emploi

Audio Setting

AUDIO is selected on the setup main menu in step 2.

Subwoofer On and Off

Subwoofer ON (Initial setting) / Subwoofer OFF
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
1 In the normal mode, press the Rotary encoder repeatedly
to select the SUBWOOFER mode.
SUBWOOFER BASS
FADER DEFEAT
2 Adjust the level by turning the Rotary encoder.

Setting the Subwoofer System

SUBW.System 1 (Initial setting) / SUBW.System 2
Select either SUBW.System 1 or SUBW.System 2 for the desired
subwoofer effect.
SUBW.System 1 : Subwoofer level changes according the
main volume setting.
SUBW.System 2 : Subwoofer level change is different from the
main volume setting. For example, even at
low volume settings, the subwoofer is still
audible.

Setting the Filter type

L=R (Initial setting) / L/R
L=R: Left and right speakers are adjusted
equally.
L/R: Left and right speakers are individually
adjusted.

Setting the Subwoofer phase

SUBW. Phase 0° (Initial setting) / SUBW. Phase 180°
The subwoofer output phase is toggled SUBWOOFER NORMAL (0°)
or SUBWOOFER REVERSE (180°). To adjust the level, turn the
Rotary encoder.

Setting the Subwoofer Channel (SUBW. Channel)

SUBW. Channel Stereo (Initial setting) / Mono
You can set the subwoofer output to stereo or monaural. Make sure to
set the correct output for your subwoofer type.
Stereo: Subwoofer stereo (L/R) output
Mono: Subwoofer monaural output

Setting the Response Slope for the High Range Speaker (TW Setup)

TW Maker's (Initial setting ) / TW User's
Depending on the response characteristics of the speaker, care should be
taken when setting the response slope of the high range speaker to
FLAT in 2.2ch (3WAY) mode (see "Adjusting and Storing the Crossover
Settings" on page 16), as speaker damage may result.
As protection from possible speaker
Maker's:
damage, FLAT cannot be set for the
response slope of the high range speaker in
2.2ch (3WAY) mode.
User's: The FLAT setting is possible in 2.2ch
(3WAY) mode.
24
-EN
TREBLE BALANCE
VOLUME SUBWOOFER

Display Setting

DISPLAY is selected on the setup main menu in step 2.

Changing Lighting Color (Illumination)

Illumination TYPE 1(Initial setting) / TYPE 2 / TYPE 3 / TYPE 4 / TYPE 5
TYPE 1 TYPE 2
You can change the lighting color of the following seven buttons.
SOURCE/ , BAND , ,
TYPE 1: When the color of the seven buttons is blue,
the color of the other is blue.
TYPE 2: When the color of the seven buttons is
green, the color of the other is blue.
TYPE 3: When the color of the seven buttons is blue,
the color of the other is red.
TYPE 4: When the color of the seven buttons is
amber, the color of the other is red.
TYPE 5: When the color of the seven buttons is red,
the color of the other is red.

Dimmer Control

Dimmer Auto (Initial setting) / Dimmer Manual
Set the Dimmer control to Auto to decrease the illumination brightness
of the unit with the head lights of the vehicle ON. This mode is useful if
you feel the unit's backlighting is too bright at night.

Scroll Type Setting

Scroll Type TYPE 1 / Scroll Type TYPE 2 (Initial setting)
Choose from two scrolling methods.
Select the type you prefer.
TYPE 1 : The characters scroll from right to left, one character
at a time, until the entire title has scrolled.
TYPE 2 : Words are built up from left to right, a single character
at a time. When the display is full, it is cleared and the
subsequent words are displayed the same way until
all words of the title have been shown.

Scroll Setting (Text Scroll)

Text Scroll Auto / Text Scroll Manual (Initial setting)
This CD player can scroll the disc and track names recorded on
CD-TEXT discs, as well as text information of MP3/WMA/AAC files,
folder names, tags, HD Radio and SAT Radio.
Auto : CD text information, folder and file names, HD and
SAT Radio text are scrolled continuously. In addition,
all tag information is automatically rotated in the
display continuously, without pressing the Title button.
Manual : The above information is scrolled only when a disc is
loaded, a channel or track is changed, etc.
• In parts of the display, scrolling may not occur, or scroll content may
differ.
TYPE 3 TYPE 4 TYPE 5
, , and MultEQ.