Manual lift units
ma x
max
100 kg
100 k g
25
(220 lbs)
(220 lbs)
max
max
100 kg
100 kg
(220 lbs)
(220 lbs)
26
27
28
29
30
NB!
Max
31
16
Manual lift units
Maximum load
Wall-mounted
100 kg, incl. worktop.
Freestanding
100 kg, incl. worktop.
Operation
Wall-hanging/freestanding
Remove
drive shaft. If there is a frame around the worktop, push the
over the drive shaft to one side and fi t the hand crank.
Adjustment
Wall-hanging/freestanding
• Adjust the manual lift unit for height by turning the hand
crank.
• Always stop turning the crank when you feel resistance at
either the upper or lower position.
• The unit can be adjusted to heights of between 680 and
980 mm above the fl oor.
Maintenance
• We recommend winding the spindle on the unit to the
maximum positions at least once a week. by raising the
unit to its full height, and then lowering it to its lowest
position, so that the internal, self-lubricating parts are
lubricated.
Min.
NB!
25
26
hand crank from under worktop and fi t onto
27
29
31
30
28