Cognex In-Sight 5000 Série Mode D'emploi page 7

Installation
Installation procedures and specifications are presented in detail in the In-Sight
5000 Series Vision System Reference Guide, which is installed with In-Sight Explorer
software. From the Windows Start menu, select the following to access the manual:
All Programs > Cognex > In-Sight > In-Sight Explorer x.x.x > Documentation.
Note:
Cables are sold separately.
l
If any of the standard components appear to be missing or damaged,
l
immediately contact your Cognex Authorized Service Provider (ASP)
or Cognex Technical Support.
CAUTION: All cable connectors are "keyed" to fit the connectors on the vision
system; do not force the connections or damage may occur.
Install the Lens
1. Remove the protective film covering the threaded lens opening, if present.
2. Attach a C-Mount lens to the vision system. The exact lens focal length
needed depends on the working distance and the field of view required for
your machine vision application.
3. If using a lens cover, remove the thread guard and attach the lens to the
vision system.
6
®