Replacing Wheels - PRO-PULSE 02255002 Manuel De L'utilisateur

MAINTENANCE
SHAFT
CAP OF SHAFT
UPPER
HANDLE

REPLACING WHEELS

To replace a wheel:
■ Disconnect the mower from the power supply.
■ Turn the mower on its side.
■ Using a flat blade screwdriver, pry off the
hubcap.
■ Remove the wheel,replace with new wheel .
■ Replace hubcap.
STORING THE MOWER
■ Disconnect the mower from the power supply.
■ Turn mower on its side and clean grass clippings
that have accumulated on the underside of the
mower deck.
■ Wipe the mower clean with a dry cloth.
■ Check all nuts, bolts, knobs, screws, fasteners,
WHEEL
etc., for tightness.
■ Inspect moving parts for damage, breakage, and
wear. Have repairs made on any damaged or
missing parts.
■ Store mower indoors in a clean, dry place out of
the reach of children.
■ Do not store near corrosive materials such as
LOWER
fertilizer or rock salt.
HANDLE
To lower the handle before storing:
ASSEMBLY
■ Fully loosen the Handle Knobs on the sides of
the handle and fold the upper handle down.
■ Push inward on each side of the lower handle,
and lift the sides of the lower handle past the
edges of the handle mounting brackets.
■ Making sure not to bend or kink the power cord.
37