JVC BR-DV3000E Mode D'emploi page 11

OPERATE
Mini
PROFESSIONAL
MIC REMOTE SEL.
SERIAL
9PIN
6 5
5
[REMOTE SEL.] Remote select
switch
Use this switch to select the remote controller
type.
9 PIN : Select this to use the RS-422A-
compatible editing remote con-
troller (RM-G820) that connects
to the
nal located at the rear panel.
Please use this unit as a player.
* This setting is valid only when
the REMOTE item of the RE-
MOTE menu is set to ON.
SERIAL : Select this to use the serial re-
mote controller (RM-G30) that
connects to the
MOTE terminal located at the
rear panel.
* This setting is valid only when
the REMOTE item of the RE-
MOTE menu is set to ON.
WIRELESS : Select this to use the provided
wireless remote controller.
Memo
● When 9 PIN or SERIAL is selected, the but-
tons on the unit you wish to render operable
can be selected from the LOCAL FUNCTION
item of the REMOTE menu.
● During OPERATION LOCK, this switch will
not be effective.
● Control via the DV IN/OUT terminal is pos-
sible (ie unaffected by the switch setting).
BR-DV3000_E_p03-49
A.DUB
DVCAM NTSC
CH-1/3
INPUT SEL.
CH-2/4
LINE
WIRELESS DV Y/C
BR-DV3000
4
9 PIN REMOTE termi-
3
SERIAL RE-
(☞
Page 59)
11
REC PLAY
PAL REC INH.
REW STOP
6
[MIC] Microphone input terminal
This is the mini jack for monaural microphone
input. When this terminal is connected to a mi-
crophone, sound input via the AUDIO IN termi-
nal located on the rear panel is not recorded.
Sound from this terminal is recorded on CH1/
CH2 in the RECORD mode and CH3/CH4 in
the AUDIO DUBBING mode.
7
[EJECT] Eject button
● Press this button to eject the cassette.
Memo
It takes about 6 seconds for the cassette to
be ejected.
● If no cassette is loaded and this button is
pressed for at least 2 seconds, a menu will be
displayed on the monitor connected to the
VIDEO LINE OUT or Y/C OUT terminal.
● When the menu is displayed, pressing this
button will resume the usual screen.
☞ Page 54, "Setting the menu")
(
13/01/03, 11:35 AM
EJECT
7
MENIU
PAUSE
SET
FF
E-11