MODE
> Digit 1 blinks, the feeding mode must be set with + .
1
= feed is dispensed once.
1
= feed is dispensed twice at 1 minute interval.
SET
> Feeding time 1 is stored.
MODE
> The next feeding time is displayed.
This can be programmed as above through SET, or
when the MODE button is pressed repeatedly, it goes
through the next feeding times back to the current time.
D
Manual operation
For feeding outside the programmed times, press the "EHEIM" manual
feeding button, which allows the rotating of the container to be trigger-
ed manually.
E
Filling
Take out the container unit lengthwise and remove the cover on the
back. Clean the drum, ensuring it is dry, and fill the amount of feed.
Then place the cover back on and insert the drum unit onto the axis.
The automatic feeder is suitable for dry feed such as flake food and
granulates. Do not use for live or freezed feed!
F
Feeding amount
By adjusting the slider, the container opening can be varied in order to
dose the amount of feed as required. For larger amounts, the pro-
gramming can be done at an interval of two times in a row.
G
Positioning
Place the automatic feeder on the aquarium cover so that the feed can
fall freely to the surface of the water. The drive unit with its reverse air-
intake opening must not be located in the humid-air section of the open
aquarium.
Do not cover up the air-intake opening. In some aquarium covers, a
corresponding feed opening has already been provided.
Optional: With open aquariums the automatic feeder device can sim-
ply be hung onto the edge of the tank using the supplied holder and
screwing down firmly.
If the batteries are not being used for a long time re-
move them! EHEIM does not provide any warranty for
damages which are caused by leaky batteries or storage
batteries.
Do not throw exhausted batteries in the household re-
fuse. Hand over the old batteries to your dealer or
public collecting points when buying new ones.