La Sommeliere CTVE142A Notice D'utilisation page 28

Masquer les pouces Voir aussi pour CTVE142A:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

This appliance is only designed to store wines and drinks.
The appliance is heavy. Be careful when moving it.
If your appliance is equipped with castors, remember that these are only
designed to facilitate minor movements. Do not move the appliance over
long distances.
Do not lean or climb on the appliance or its elements.
In order to avoid falling objects and to prevent damage to the appliance,
do not overload the compartments of the appliance.
Caution! Cleaning and servicing
Before carrying out servicing, switch off the power supply and disconnect
the appliance.
When cleaning the appliance, do not use metal objects, steam systems,
volatile fluids, organic solvents or abrasive substances.
Do not use sharp or pointed objects to remove ice. Use a plastic scraper.
Important information concerning installation!
To ensure proper electrical connection, follow the recommendations given
in the present manual.
Unpack the appliance and visually check that it is not damaged. Do not
connect a damaged appliance. Inform your retailer or point of sale of any
damage. In such a case, keep the packaging.
It is recommended that the appliance be allowed to settle for at least
4 hours before connecting the electrical power supply, so that the
compressor fluid feed is correct.
Proper air circulation is necessary to avoid overheating. To ensure
sufficient ventilation, observe the installation recommendations provided.
In order to avoid fire risk, wherever possible, ensure that the appliance is
not in contact with walls or with any hot element (compressor, condenser).
Observe the installation recommendations.
The appliance should not be placed close to radiators or cooking hot
plates or gas
rings.

Publicité

Table des Matières
loading

Table des Matières