Set The Clock Manually - Explore Scientific RDP1003 Mode D'emploi

SET THE CLOCK MANUALLY

1. Press and hold [SET] button to enter time and date
setting.
2. The setting parameter will flash.
3. Press [+] button once, the figure will increase 1 unit
(when setting minute, second will reset to 0). Press and
hold the [+] button, the figures will increase rapidly.
4. Press [–] button once, the figure will decrease 1
unit (when setting minute, second will reset to 0).
Press and hold the [–] button, the figures will de-
crease rapidly.
5. Press [SET] button to confirm setting and enter to
next parameter.
6. Sequence of setting: Year  Month  Date  Hour
 Minute  Exit
7. If there is no action in 20 seconds, the setting will be
saved and will exit the setting mode.
LANGUAGE
1. In standard mode, press and hold [–] button to set
weekday language. Stop holding the button when the
desired language is displayed.
1. Language setting sequence: German (GE)  French
(FR)  Italian (IT)  Spanish (SP)  English (EN)
SET SECOND TIME FUNCTION
1. Press [SET] button several times until the display
shows the second time.
2. Press and hold [SET] button to enter time setting.
3. The setting parameter will flash.
4. Press [+] or [–] button to set the desired data.
5. Press [SET] button to confirm setting and enter to
next parameter or to exit.
6. Sequence of setting: Hour  Minute  Exit
TIME ZONE SETTING (FOREIGN CLOCK)
To set a foreign time zone clock, proceed as follows:
1. First, press [SET] button several times until the
display shows the temperature display (To enter
standard mode).
2. Press and hold [+] button to switch to foreign time
display mode. [F] symbol will be shown in display.
3. Press and hold [SET] button to enter foreign time
setting.
4. During setting, the setting parameter will flash.
5. Press [+] or [–] button to set the desired data.
6. Press [SET] button to confirm setting and exit.
EN
IT
DE
FR
ES
9