Cleaning The Condensation Channel And Drainage Hole; Removing The Fittings - Bosch 2 Série Notice D'utilisation

en Cleaning and servicing
Clean the appliance, the fittings
2.
and the door seals clean with a
dish cloth, lukewarm water and a
little pH-neutral washing-up liquid.
Dry thoroughly with a soft, dry
3.
cloth.
Insert the fittings.
4.
Electrically connect the appliance.
5.
Switch on the appliance.
6.
→ Page 35
Putting the food into the appliance.
7.
Cleaning the condensation
channel and drainage hole
Regularly clean the condensation
channel and drainage hole to ensure
that the condensation can drain.
Carefully clean the condensation
▶
channel and the drainage hole,
e.g. using a moistened cotton bud.
→ Fig.
3

Removing the fittings

If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the shelf
Lift the shelf, pull it out, lower it
▶
and swing it out to the side.
→ Fig.
4
Removing the bottle tray
Pull out and remove the bottle tray.
▶
→ Fig.
5
Removing door racks
Lift the door rack upwards and re-
▶
move it.
→ Fig.
6
Removing the fruit and vegetable
container
Pull the container out all the way.
1.
38
Lift the container at the front
2.
remove it ⁠ .
→ Fig.
7
and