FLAEM NebulAIR+ Mode D'emploi page 13

sory, place it on your face as shown in the picture (with or
without using the elasticated strap).
5. Start the device by means of switch (A1) and breathe deep-
ly in and out. After inhaling, we recommend holding your
breath for an instant to allow the inhaled drops of aerosol
to deposit. Then exhale slowly.
6. Upon completing application, switch off the device and
unplug it.
ATTENTION: If after the therapy session an evident deposit of moisture forms within the
pipe (B), detach the pipe from the nebuliser and dry it with the very ventilation from the
compressor; this operation prevents possible blooms of mould inside the pipe.
USE METHODS OF THE RF7 DUAL SPEED PLUS NEBULISER WITH SPEED SELECTION
AND VALVULAR SYSTEM
It is professional, quick, recommended to administer all types of
medications, including the costlier ones, even in patients with chronic
diseases. Thanks to the geometry of the RF7 Dual Speed Plus nebuliser
cup internal ducts, we have obtained a recommended, active particle size
to treat even the lower respiratory tract.
For faster inhalation therapy, position the valve speed selector (C1.4)
pressing on the word MAX with your finger.
For more effective inhalation therapy, position the valve speed selector
(C1.4) pressing on the opposite side of the word Max with your finger.
In this case, you have optimal assumption of the medication, minimising
leaks into the surrounding environment, thanks to the valvular system
with which the nebuliser cup, mouthpiece and mask are equipped.
SOFTTOUCH MASKS
Soft
biocompatible
material
Dispersion
Limiting device
During inhalation, the tab that
works as a Dispersion Limiting
device bends toward the inside of
the mask.
The SoftTouch masks have an external edge made in
soft, biocompatible material that guarantees optimal
adherence to the face and are also equipped with the
innovative Dispersion Limiting device. These dis-
tinctive features allow increased sedimentation of the
medication within the patient's body, also limiting its
dispersion.
11
MAX
During exhalation, the tab
that works as a Dispersion
Limiting device bends to-
ward the outside of the mask.