Buchi Interface I-300 Pro Manuel D'utilisation page 113

Masquer les pouces Voir aussi pour Interface I-300 Pro:
Table des Matières

Publicité

Büchi Labortechnik AG
Manuel d'utilisation Interface I-300 Pro
Communication cable. BUCHI COM, 0.3 m, 6p
Enables connection between Rotavapor® R-300 / R-220 Pro,
Interface I-300 / I-300 Pro, Vacuum Pump V-300 / V-600,
Recirculating Chiller F-3xx, VacuBox and LegacyBox.
Communication cable. BUCHI COM, 1.8 m, 6p
Enables connection between Rotavapor® R-300 / R-220 Pro,
Interface I-300 / I-300 Pro, Vacuum Pump V-300 / V-600,
Recirculating Chiller F-3xx, VacuBox and LegacyBox.
Communication cable. BUCHI COM, 5.0 m, 6p
Enables connection between Rotavapor® R-300 / R-220 Pro,
Interface I-300 / I-300 Pro, Vacuum Pump V-300 / V-600,
Recirculating Chiller F-3xx, VacuBox and LegacyBox.
Communication cable. BUCHI COM, 15 m, 6p
Enables connection between Rotavapor® R-300 / R-220 Pro,
Interface I-300 / I-300 Pro, Vacuum Pump V-300 / V-600,
Recirculating Chiller F-3xx, VacuBox and LegacyBox.
Mini-DIN to DC-Jack, 300 mm
Meant to be used with 1 Vacuum Pump V-300 and 2 evapo-
rator systems with Interface I-300/I-300 Pro and Rotavapor®
of older generations. Connection between VacuBox and po-
wer adapter of the Interface I-300/I-300 Pro.
Communication cable. Mini-DIN, Y-piece, 2.0 m
Meant to be used with 1 Vacuum Pump V-300 and 2 Rota-
vapor® systems with the Interface I-300/I-300 Pro. Connec-
tion between VacuBox and Vacuum Pump V-300.
Communication cable. RJ45, 2 m
Connection between vacuum controller/interface and recir-
culating chiller or vacuum controller/interface and vacuum
pump.
Communication cable. RJ45, 5 m
Connection between vacuum controller/interface and recir-
culating chiller or vacuum controller/interface and vacuum
pump.
Cooling water valve. 24VAC
Valve opens cooling water feed during distillation. Meant to
be used with a vacuum controller/interface.
Fastening set. For VacuBox, incl. holder 2 pcs,
tube
Used to fasten VacuBox on the Vacuum Pump V-300 or
V-600.
Foam sensor. Incl. holder
Prevents sample from foaming into the condenser by aera-
tion of system temporarily. Meant to be used with the In-
terface I-300 / I-300 Pro.
Réf. article
11058705
11058707
11058708
11064090
11062266
11062255
044989
11056240
031356
11062957
11061167
Annexe | 10
Schéma
113/126

Publicité

Table des Matières
loading

Produits Connexes pour Buchi Interface I-300 Pro

Ce manuel est également adapté pour:

11593782

Table des Matières