Camera Connection - DELTA DORE Tycam 1100 Guide D'installation

7 - Camera connection

Select your connection mode:
The RJ45 cable is briefly required for this mode.
WiFi
WPS
Connection modes by Wi-Fi link (2.4 Ghz).
The local Wi-Fi network must be secure.
WPS connection: Check the compatibility of your Wireless router.
Ethernet
Connection mode by Ethernet RJ45 link (Cat. 5E, max. 100m).
POE
The PoE connection mode is used to power the camera by the Ethernet RJ45
link. It requires a Switch or PoE Injector to be installed as well as a category 6
Ethernet cable (not supplied).
Type and max. length according to the switch used (Poe SW4: 250m max)
PoE switch option: Poe SW4 Ref: 6417010
RJ45
RJ45
PoE switch
RJ45
RJ45
RJ45
EN
27